Dia.14
Dia.15
Dia.16
Dia.17
Dia.18
Dia.19
Dia.20
Dia.21
MODIFYING OR ADDING
NEW PROGRAMMES
1. Press ‘PROG’ button and hold for approx 2
seconds, the display will show: (Dia.14).
2. Use ‘+’ or ‘-’ button to select the day grouping
which requires modifying or a new day grouping
for a new programme.
3. For modification press ‘PROG’ repeatedly to
arrive at the programme time requiring
modification then use ‘+’ or ‘-’ button to make
the change. Press ‘PROG’ repeatedly again to
arrive at the next time requiring modification
and use ‘+’ or ‘-’ button to make the change.
ONE AND TWO HOUR BOOST
1. Pressing ‘-’ (Boost) once in normal
operating mode turns on for 1 hour period
(Dia.19).
2. Pressing ‘-’ (Boost) twice turns output on for a 2
hour period (Dia.20).
3. Pressing ‘-’ (Boost) button three times cancels the
(Boost) ON period (Dia.21).
3. Press ‘TIME’ button then the icon ‘MON’ will be
flashing (Dia.12).
4. Use ‘+’ or ‘-’ button to select ‘TUE’, then press ‘TIME’
button twice to copy the data. The display will
show: (Dia.13).
(Example shown for copying data TUE to THU)
When the ON/OFF times for WED are set, the display
will show ‘THU’:- (Dia.11).
OPERATING MODE
Operating mode needs to be set to allow programmed
times to function
To set timer status -
1. Use ’+’ button to set the output mode.
ON -
Output to permanently ON and omit the
program (Dia.15).
OFF -
Output to permanently OFF and omit the
program (Dia.16).
ON AUTO -
Output to ON until next program OFF
period (Dia.17).
AUTO OFF -
Output to OFF until next program ON
period (Dia.18).
(Note - When in program mode display will always show AUTO)
PROGRAMMING THE
‘ON’/OFF’ TIMES
1. Press the ‘PROG’ button and hold for 2 seconds,
after 2 seconds the display will show: (example
shows 7 Day setting
Dia.6)
3. Once the desired day grouping is selected,
press ‘PROG’ button to move onto programming
ON/OFF times. Display will show PROG 1 ON, and
the hour digits flashing (24 hour clock) (Dia.7).
2. Use the ‘+’ or ‘-’ button to change the day
grouping (PROG) at the top of the display.
This will step through the following programming
options:
7 DAY - MON TUES WED THU FRI
SAT SUN
All of them have the same programming.
OR
5 DAY - MON TUE WED THU FRI
Are grouped as one group, and they will all have
the same programming. SAT and SUN will be
programmed individually.
OR
INDIVIDUAL DAY -
Each day will have its program set individually.
MON followed automatically in programming
by each of the other days. To copy times set for an
individual day to another day (e.g. copy Sat set
times to Sun), please see
PROGRAM DUPLICATION
below.
4. Use the ‘+’ or ‘-’ to set the hours and the ‘PROG’ to
change between hours and minutes. Followed by
‘+’ or ‘-’ again to set the minutes. Press ‘PROG’ to
change to program OFF time.
(Dia.8)
5. Use the ‘+’ or ‘-’ to set the OFF time in the same
way as for PROG 1 ON time.
6. Press ‘PROG’ to scroll through program 2 ON,
program 2 OFF, program 3 ON, program 3 OFF,
program 4 ON, program 4 OFF, adding in times
as required. If you wish to omit programmes just
leave dashes in that ON/OFF location. Press
‘PROG’ to move to the next linked day (SAT
follows the 5 day group automatically) (Dia.9).
7. Set ON/OFF times as before. Press ‘PROG’ to
move to the next linked day (SUN follows the
SAT automatically) (Dia.10).
Dia.5
Dia.6
Dia.7
Dia.8
Dia.9
(Example shown is for 5 + 1 + 1 + day program)
Dia.10
8. Set ON/OFF times as before.
9. Once program 4 OFF has been set, press ‘PROG’
to exit program mode and return to operating
mode.
PROGRAM DUPLICATION
There are two copy functions: copy one day to
another, or copy one day to all other days. When
programming for ‘Individual Day’ or ‘5 Day’ you can
copy the programmed data from one day to another
day.
1. When setting ON time of ‘PROG’ 1, press ‘TIME’
button and then use ‘+’ or ‘-’ to select the day you
want to copy.
2. Press ‘TIME’ button twice to copy the data of the
selected day to current day. Or press ‘TIME’ button
for 2 seconds to copy the data of the selected day
to the following days.
Note: Only ONE of the following
options can be used at one time.
Dia.12
Dia.13
Dia.11
Dia.22
Note: Pressing the ‘PROG’ and ‘TIME’ (combinations of buttons) to exit the summer mode.
(Example: the clock will change to ‘11.00’, if the
time is ‘10.00’ now press “PROG’ and ‘TIME’.)
S
SUMMER MODE
1. In operating mode, pressing the ‘PROG’ and
‘TIME’ (combination of buttons) to set the
summer mode. The clock will forward on one
hour (showing the icon
Dia.22).
T
205
Supply
Load
TIMER
13
A Fuse
Isolation Switch
L
N
N
L
Wiring Diagram
Note: Battery is fully charged after 14.5 hours.
The non-replaceable, fully charged battery, will retain any program information for a
period of 700 hours should their be power loss or the unit switched off with the double
pole isolation switch.
Display is not visible during this period unless a button is pressed.
Battery Back up / Life
