5.
Parameter setting
When the display is powered on long press
!
and
!
,
will enter parameter setting
mode (Figure 13), in this mode, can change parameter values long press again
!
and
!
will quit parameter setting mode or no operation during 10s will also quit this mode
!
In parameter setting mode short press
!
/
!
will change parameter value short
press
!
will save current value and switch to next parameter
1)
P01-back light lightness
:
Short press
!
/
!
will switch from 1 to 3, Level 3 is lightest. Level 2 is default
value.
!
2)
P02-kmh/MPH: