background image

CONTENTS

1 Trial Run �������������������������������������������������������������������������������������������������� 1

1.1 Check for Wiring ......................................................................................................... 1
1.2 Check for the Water System ...................................................................................... 1
1.3 Check for the Communication System ....................................................................... 1
1.4 Trial Run ..................................................................................................................... 1

2 Error Code List ���������������������������������������������������������������������������������������� 1
3 Flow Chart Of Troubleshooting ������������������������������������������������������������� 3

3.1  Comp High-pressure Protection E1 .......................................................................... 3
3.2  Comp Low- pressure Protection E3 .......................................................................... 4
3.3  Comp Discharge Temp Protection E4 ....................................................................... 4
3.4  Overload Protection of Compressor or Driver Error .................................................. 5
3.5  DC Fan Error EF ....................................................................................................... 5
3.6  Temperature Sensor Error ......................................................................................... 6
3.7  Communication Malfunction E6 ................................................................................ 6
3.8 Capacity Switch Error (Code:"C5")............................................................................. 7

4 Diagnosis of Driving ������������������������������������������������������������������������������� 7

4.1 Diagnosis Flowchart of Driving of Single-phase Unit and Three-phase Unit.............. 7

5 Daily Maintenance and Repair ��������������������������������������������������������������11

5.1 Daily Maintenance .................................................................................................... 11
5.2 Troubleshooting ........................................................................................................ 12
5.3 Repair ....................................................................................................................... 12

Содержание Versati II Series



















Отзывы: