Gree U-MATCH GFH09K3CI, Руководство по обслуживанию

Страница: 74 / 264

A/A DC INVERTER U-MATCH AIR CONDITIONERS INSTALLATION
71
4 ） Installation of round Supply air outlet
Figure 1-1-16
1.2 Installation of Ceiling Type
1.2.1 Before Installation
‹ After receiving the machine, please check for any transport damage. If finding any surface or internal damage,
please immediately report to the transport company or equipment company in writing.
‹ After receiving the machine, please check the unit and accessories in reference to the packing list. Ensure that
the model is correct and the machine is in good condition. Please also check if the specification and quantity of
accessory parts are correct.
‹ Determine the correct handling route and methods, thus to avoid damaging the unit or causing possible hazard.
For the sake of protection and safety, it is suggested to move the unit with the packaging box. Even though it is
not permitted to do like this under special occasions, do not remove the packaging box, thus to avoid loosening
or falling during handling.
‹ Confirm if the installing foundation is solid. When this unit is to be installed on the metal section of the building,
make sure that the electrical insulation must comply with applicable standards.
‹ Ensure that the place of installation is far from the area where the inflammable or explosive substances are
stored, thus to avoid possible explosion or fire due to leakage.
1.2.2 Installation Site
‹ Such a place where cool air can be distributed throughout the room.
‹ Such a place where condensation water is easily drained out.
‹ Such a place that can handle the weight of indoor unit.
‹ Such a place which has easy access for maintenance.
‹ Such a place where is permitting easy connection with the outdoor unit.
‹
Such a place where is 1m or more away from other electric appliances such as television, audio device, etc.
‹ Avoid a location where there is heat source, high humidity or inflammable gas.
‹ Do not use the unit in the immediate surroundings of a laundry, a bath, a shower or a swimming pool.
‹ Be sure that the installation conforms to the installation dimension diagram.
‹ The space around the unit is adequate for ventilation
1.2.3 Caution for Installation
‹ Adjust the distance from the unit to the ceiling slab beforehand (Refer to Figure 1-2-1).
‹ Fix the hanger bracket to the suspension bolt (Refer to Figure 1-2-2).
‹ Make sure that extended suspension bolt from the ceiling stays inside the arrowed position. Readjust the
hanger bracket when it is outside the arrowed position. (Refer to Figure 1-2-3)
‹ Suspension bolt stays inside the cap of indoor unit .Never remove the cap. Lift the unit and slide forward unit
the dent. (Refer to Figure 1-2-4)
‹
Screw tightly both hanger bracket setting bolts (M8) (Refer to Figure 1-2-2)
‹ Screw tightly both hanger bracket fixing bolts (M6) to prevent the movement of the indoor unit. (Refer to Figure