INSTALLATION
6. Lift unit level and slide into wall sleeve until seal
rests firmly against front of wall sleeve.
a.
Secure with 4 mounting screws provided with the unit.
b.
Careful not to over tighten and strip the screws.
Fig. 11
5. Re-install junction box and cover. Secure power cord.
a. Re-install junction box.
b. Use wire clamp to secure power cord to basepan
with screw provided.
c. Replace junction box cover.
Wire clamp
Fig. 10
7.
Replace front panel.
a. Place tabs over top rail (1).
b. Push Inward at bottom until panel snaps into place (2).
c.
Plug unit in and turn power on.
Wire clamp
2
1
Fig. 12
13
12
Power
Supply
Cord
Wire Clamp
