GMV5 HR Heat Recovery Cooling and Heating Mode Exchanger
5
3 Preparation before installation
Caution
！
The product photos are only for reference. The unit for size is mm, except otherwise stated.
3.1 Standard Accessory
Please use below provided standard parts according to requirement.
No.
Name
Photo
Q
’ty
Purpose
1
M10X8
Nut with washer M10X8
4
Used for hanging indoor unit
2
Nut M10
(hesagon nut M10X8.4)
4
Used for hanging indoor unit
3
Washer 10
(spring washer M10X2.6)
4
Used for hanging indoor unit
4
High-tenperature tieline
8
Wrap sponges at the
connection position
5
Installation template
/
1
Use for drilling holes at the
ceiling
The packed attachments should be subject to actual objects. If there are any alterations, there will
be no further notice.
3.2 Installation Site
（
1
）
Make sure the hanging parts can hold the weight of unit.
（
2
）
Water can be drained out from the drainage hose conveniently.
（
3
）
No obstacles at outlet and inlets. Keep the air ventilation in good condition.
（
4
）
for indoor unit (as shown in below fig) and the space used for maintenance should be ensured.
（
5
）
Please keep the unit away from those positions where there
’s thermal sournce, inflammable
gas and smog.
（
6
）
The unit is the cassette type (concealed type).
（
7
）
Indoor unit, outdoor unit, power cord and connection cord should be kept 1m above away from
TV and radio for preventing graphic interference and noise.
（
Even the distance is 1m, if there
’s strong
electric wave, there
’s still noise
）
.
Unit
：
mm
