Gree ME30-24/F1 K Скачать руководство пользователя страница 5

Страница: 5 / 44

S2S KNX Gateway

1 User Notices

Distinguished users:
Before installing or use this appliance, please read this instruction manual

carefully, and install and use according to the process stipulated in the instruction
manual.

The following marks should be specially noted:

Warning!

It means misoperation may cause personal casualty or

severe injury.

Caution!

It means misoperation may cause damage of unit.

Warning!

(1) It should be installed by professional personnel, improper installation

may cause fire or electric shock.
(2) Insert the socket only after ensuring the socket of power cord is dry and

clean.
(3) Before touching the electric components, please make sure that the

appliance is power-failed.
(4) Please do not touch this appliance with wet hands, which may cause

electric shock.
(5) Please use the power cord with designated specification; poor contact or

improper installation may cause fire hazard.

(6) Power of this equipment is supplied by IDU of air conditioner; it is not

allowed to connect other power source into this equipment, otherwise it may

cause fire hazard and damage the appliance.

(7) For the equipment with power plug, the power socket should be installed

near the equipment for convenient using.

Содержание ME30-24/F1 K













































Результаты поиска

Содержание ME30-24/F1 K

Отзывы:

Похожие инструкции для ME30-24/F1 K

Бренды по названию

Популярные бренды

Gree ME30-24/F1 K, Руководство пользователя

Результаты поиска

Содержание ME30-24/F1 K

Отзывы:

Похожие инструкции для ME30-24/F1 K

Бренды по названию

Популярные бренды