Gree LIVV09HP230V1A Series, Руководство по обслуживанию и запасным частям

Страница: 34 / 120

79
Service Manual
Operation guide
1.
2. After putting through the power, press "ON/OFF" button on remote controller to turn on the air conditioner.
3.
4.
Press "▲" or " ▲ " button to set your required temperature. (Temperature cant be adjusted under auto mode).
Press "MODE" button to select your required mode: AUTO, COOL, DRY, FAN, HEAT.
Press "SWING" button to select fan blowing angle. 5.
Press "FAN" button to set your required fan speed: auto, low, medium and high speed.
Replacement of batteries in remote controller
● During operation, point the remote control signal sender at the receiving window on indoor unit.
● The distance between signal sender and receiving window should be no more than 8m, and there should be no obstacles between them.
●
indoor unit during operation.
Replace new batteries of the same model when replacement is required. ●
When you dont use remote controller for a long time, please take out the batteries. ●
●
1.
If the display on remote controller is fuzzy or theres no display, please replace batteries.
2. Replace two 7# (AAA 1.5V) dry batteries, and make sure the position of "+" polar and "-" polar
are correct.
3. Reinstall the cover of battery box.
Press the back side of remote controller marked with "
out the cover of battery box along the arrow direction.
Note:
signal sender battery
Cover of battery box
remove
reinstall
31