1. The installation method for castor:
avoid the unit damage.
5 , in order to
Note:
It must be installed the castors before operating the unit, or it will cause the inconvenient
move or even a damage. When install the castors, the gradient should be less than
1). Open the accessory bag, take out the castors (4).
2). Raising up the unit horizontally, 10-20cm away from the ground.
3). Screw the castors into the slot of the
c
hassis. The installation procedure is shown as follow:
2 The installation method for drainage pipe:
Note:
It must be installed the drainage pipe before operating the unit, or it can cause the drainage block
and will influence the unit running.
1). Take out the drainage pipe (including the drainage hole cap and clamp) from the accessory bag. Install
the drainage pipe to the drainage hole of the chassis, make sure to insert the drainage pipe to the bottom of the
outlet.
2). After inserting the drainage pipe, fix it on the clamp of the rear plate, it is shown as follow:
Castor
Drainage pipe
After inserting the
drainage pipe, fix it
on the set clamp of
the rear plate
Drainage hole
Clamp
－
17
－
Slot
Rear plate
INSTALLATION GUIDE FOR CASTOR, DRAINAGE PIPE AND AIR EXHAUST ACCESSORY