Gree HLR35SM/NaA-M, Руководство по обслуживанию

Страница: 20 / 44

MODULAR MINI CHILLER CONTROL
20
Fan 1 ON
【
OFF
】
Fan 2 ON
【
OFF
】
Fan 3 ON
【
OFF
】
Sys.State
【
Cool/Heat/Defrost/Anti-fre.
】 ▼
Ass. Heat 1 ON
【
OFF
】 ▲
Ass. Heat 2 ON
【
OFF
】
4-Valve 1 ON
【
OFF
】
4-Valve 2 ON
【
OFF
】 ▼
EXV. 1
▲
XXX Step
EXV. 2
XXX Step
▼
Compressor 1 ON
【
OFF
】 ▲
Compressor 2 ON
【
OFF
】
C Water Pump ON
【
OFF
】
H Water Pump ON
【
OFF
】 ▼
Press the Up or Down selection button to convert among the above four pages. Press the
Exit button to quit the menu page and go back to the previous menu.
When page 1 is present on the screen, press the Reset button and the Exit button
simultaneously for 3 seconds, and C Water Tin and H Water Tin , as displayed previously,
will be converted to C Aver.Tin and H Aver.Tin . And press again the Reset button and the
Exit button simultaneously for 3 seconds, and C Water Tin and H Water Tin will be
displayed again. As such, display can be converted between water inlet temperature and
water inlet average temperature.
Only one item will be displayed in 【】 in page 2 .When the run mode is cool or defrost,
【
Anti-Fre.T/Anti-HeatT
】
shows Anti-Fre.T; When the run mode is heat,
【
Anti-Fre.T/Anti-HeatT
】
shows Anti-HeatT.
Note: above temperature display is dependent on unit model. If the temperature
sensor is not existent for a certain model, “None” would be present on the display
zone for corresponding temperature point.
b
、
State View
Used for checking the on/off status of motors. Select the State View and press the
Confirm to go to the pages as shown in the following drawings.
Page 1
Page 2
Page 3
Page 4