I Feel function
When controller received the orders that the controller will work according to ambient temperature which is sent by remote control (Except
Defrost and Anti-cool wind, it will still adopt the air conditioner self ambient sensor sampling value), the remote control in every 10mins, to
sent the ambient temperature value to controller. 11mins later, the controller haven’t received the ambient temperature value from the
remote control that the air conditioner will run itself ambient temperature. If there is no setting function that the ambient temperature will
adopt the AC sensor sampling value. Power off will not memorize this function.
Dry function
2. When Dry operation is running, operate the Dry button, the inner fan will immediately stop
then the guide louver will turn off immediately.
3. When power on, the Dry function is off.
4. When power on, the Dry function is defaulted off on the remote control
1.When unit is on, under the Cool, Dry mode (there is no Dry function in Auto, Heat, Fan mode), can set up the ON/OFF of Dry mode, if
the Dry is on, press the ON/OFF button to turn off the unit, the inner fan will run at low fan speed and run for 10mins (within 10mins will
run at original running status, the other loads will turn off), then will turn off the whole unit; When the presetting for Dry is off, press the
ON/OFF button to turn off the unit directly.
