Gree GWHN09AANK3A1A, Руководство пользователя

Страница: 24 / 62

Automatic Control of Fan Speed
Under this mode, the indoor fan will automatically select high, medium or low speed with the change of ambient
temperature.
Displayer
Dual 8 display
UP\Down swing fan function
After powered on, the up and down swing motor will firstly rotate the air guide baord to position O in anticlockwise, turn off the air vent.
After unit is turned on, if there is no siwng function set up, under the Heat mode or Auto Heat mode, the up and down air guide board will
rotate to posi tion D in clockwise: In other modes, the up and down guide board will rotate to horizontal position L1 clockwise. When turning
on the unit to set up swing function synchronously. If unit is turned on to set up the swing function that the guide louver will swing between
L and D. There are 7 kinds of status of swing or guide louver. Position L, Position A, Position B, Position C, Position D, Position L and
Position D, Position L to Position D to stop swing (the inclination between L-D is conformal). When unit is off the air guide louver will close
and turn to position 0. The swing is only valid while setting swing order and indoor fan motor is running.
PG motor lock protection
When turn on the fan motor,ifmotor continuously run for a while and the running speed is very slow,in order to prevent motor
automatically self-protection,it will stop running and display lock;If currently turns unit on,that dual 8 will display lock error
code H6;If current is unit off,unit will not display the block error information.
Turbo function
The turbo function is available in Cool and Heat modes.
Dry function
Dry function is available in Cool and Dehumidifying modes.
Running figure and mode figure display
After powered on, the figure will be displayed, then only Power/running indicator turn on. When using remote controller to open the unit,
it will turn on, at the same time to display current setting running modes. To turn off the light button, close all display, but except the
indicator display (no light control). When defrosting dual 8 will display H1, the corresponding indicator display extinguish 3s and blink one
time.
Power-off Memory
Memory contents: Mode, UP/DOWN Swing, light, Set temp, Set fan speed.
After de-energized, and re-energized, the unit will start to run with the memory function automatically. The system, if the last
remote control signal do not set timer function, will memorize the last remote control signal and run according to it. If the last
remote control signal has set timer function, the system is de-energized before the set time,when re-energized, the system
will memorize the timer function, the set time will recalculate. If the last remote control signal has set timer function and the
system is de-energized after the set time, when re-energized, the system will memorize the running status before de-energized.
The first power on, nixie tube will default to display current presetting temperature (temp. presetting range is 16-30 ). If received display
setting temperature signal, the nixie tube will display the presetting temp.; if received display the ambient temp. signal, the nixie tube will
display the current indoor ambient temp., when set up other mode by remote controller, the display will be maintained. In displaying ambient
temp., the remote control received the effective remote control signal, then will display 5s setting temp., then return to display ambient
temp., display. The ambient temp. sensor malfunction will display “F1”; Indoor tube sensor malfunction will display “F2”, wire-trip malfunciton
protection will display “C5”.
Tpreset
Tpreset
Tpreset
Setting temp. Tpreset
1hr.
2hrs. 2hrs. above
Downloaded from AC-Manual.com Manuals