Gree GWH18PD-K3NNA1A, Руководство по обслуживанию

Страница: 20 / 68

Function and Control
17
Remote control
●
X-FAN button
X-FAN
●
TURBO button
TURBO
●
+ button
+
●
Presetting temperature can be decreased.
Press this button, the temperature can be
- button
-
set up, continuously press this button
and hold for two seconds, the relative
contents can quickly change, until unhold
this button and send the order that the
ć
(
o
F) signal will be displayed all the time.
The temperature adjustment is unav-
ailable under the Auto mode, but the order
can be sent by if pressing this button.
In Cool or Heat mode, press this button
can turn on or turn off the Turbo function.
After turned on the Turbo function, its
signal will be displayed. When switching
the mode or changing fan speed, this
function will be canceled automatically.
For presetting temperature increasing.
Press this button, can set up the temperature,
when unit is on. Continuously press and
hold this button for more than 2 seconds,
the corresponding contents will be
changed rapidly, until unpress the button
ć˄̧˅
llaying all along. In Auto mode, the temp-
erature can not be set up, but operate this
button can send the signal. Centigrade
setting range:
16-30; Fahrenheit scale
setting range 61-86.
then send the information, is disp-
TEMP button
TEMP
●
Press this button, could select displaying
the indoor setting temperature or indoor
ambient temperature.When the indoor unit
firstly power on it will display the setting
temperature, if the temperature's displaying
," " o t s u t a t s r e h t o m o rf d e g n a h c s i s u t a t s
displays the ambient temperature, 5s later
or within 5s, it receives other remote control
signal that will return to display the setting
temperature. if the users haven't set up the
temperature displaying status, that will
display the setting temperature.
●
After powered on, the setting temperature
displaying is defaulted, (according to
customers requirements to display, if
there is no requirement that will default
to display the presetting temperature
and there is no icon displayed on wireless
remote control). Press this button,
(When displaying ), will display
presetting temperature; (when displaying )
will display indoor ambient temperature,
current displaying status will not be
changed. If current displays indoor
ambient temperature, if received the other
remote control signal, it will display
presetting temperature, 5s later, will back
to display the ambient temperature.
(This function is applicable to partial ofmodels)
(This function is applicable to partial of models)
PressingX-FAN button in COOL or DRY
mode,
the icon
After energization, X-FAN OFF is defaulted.
X-FAN is not available in AUTO,FAN or
HEAT mode.
is displayed and the
indoor fan will continue operation for
10 minutes in order to dry the indoor unit
even though you have turned off the unit.
Notice: This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function, which the
model dosen't have, if press the corresponding button on the remote controller that the unit will keep the original running status.