17
Technical Information
Service Manual
Note:
●This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function, which the model
doesn't have, if press the corresponding button on the remote controller that the unit will keep the original running status.
●After putting through the power, the air conditioner will give out a sound. Operation indicator " " is ON (red indicator, the colour is
different for different models). After that, you can operate the air conditioner by using remote controller
.
●Under on status, pressing the button on the remote controller, the signal icon " " on the display of remote controller will blink once and
the air conditioner will give out a “de” sound, which means the signal has been sent to the air conditioner.
1.ON/OFF
Press this botton to turn on the unit. Press this botton again to turn off the unit.
2.FAN
Press this botton can select fan speed, it can be selected circularly as below:
Under dry mode, fan speed can't be adjusted.
3.
Press " " or " " button once increase or decrease set temperature 0.5
o
C.
Holding " " or " " button, 2s later,set temperature on remote controller will change quickly. On releasing button after setting is finished,
temperature indicator on indoor unit will change accordingly.
4.MODE
Press this button to select your required operation mode.
Note: Only for models with heating function.
5. SWING
Press this button can select up & down angle. Fan blow angle can be selected circularly as below:
When selceting " " , air conditioner is blowing fan automatically.Horizontal louver will automatically swing up & down at maximum angle.
When selecting "
", air conditoner is blowing fan at fixed position. Horizontal louver will stop at the fixed position.
Hold " " button above 2s to set your required swing angle, When reaching your required angle, release the button.
6. LIGHT
Press this button to turn off display light on indoor unit. "
" icon on remote controller disappears, Press this button again to turn on
display light. "
" icon is displayed.
7.
SWING
Press this button can select left & right swing angle. Fan blow angle can be selected circularly as below:
Press this button continuously more than 2s, the main unit will swing back an forth from left to right, and then loosen the button, the unit
will stop swinging and present position of guide louver will be kept immediately.
Under swing left and right mode, when the status is switched from off to
, if press this button again 2s later,
status will switch to off
status directly; if press this button again within 2s, the change of swing status will also depend on the circulation sequence stated above.
This function is only available for some model.
8.TURBO
Under COOL or HEAT mode, press this button to turn to quick COOL or quick HEAT mode. " " icon is displayed on remote controller.
Press this button again to exit turbo function and " " icon will disappear.
If start this function, the unit will run at super-high fan speed to cool or heat quickly so that the ambient temp. approachs the preset temp.
as soon as possible.
9.QUIET
Press this button, the Quiet status is under the Auto Quiet mode (display "
" ) and Quiet mode (display " " ) and Quiet OFF (there
is no signal displayed), after powered on, the Quiet OFF is defaulted.
