29
Technical Information
Service Manual
Note:
Outdoor temperature display is not available for some models. At that time, indoor unit receives " " signal, while it displays indoor
set temperature.
Press this button once, to turn on the I FEEL function, then the figure of "I FEEL"will be displayed, after every press of other function button,
every 200ms to sendI FEEL once, after this function started, the remote controller will send temperatureto the main un it in every 10 minutes.
When repress this button, this function will beturned off. When I FEEL function is turned on, the remote controller should be put within the
area where indoor unit can receive the signal sent by the remote controller.
Press " WiFi " button to turn on or turn off WiFi function. When WiFi function is turned on, the " WiFi " icon will be displayed on remote
controller; Under status of remote controller off, press "MODE" and " WiFi " buttons simultaneously for 1s, WiFi module will restore to
factory default setting.
● This function is only available for some models.
Press this button, can select Sleep 1 ( ), Sleep 2 ( ), Sleep 3 ( ) andcancel the Sleep, circulate between these, after electrified,
Sleep Cancel is de-faulted.
Sleep 1 is Sleep mode 1, in Cool modes: sleep status after run for one hour, the main unit setting temperature will increase 1
℃
, 2 hours,
setting temperatureincreased 2
℃
, the unit will run at this setting temperature; In Heat mode:sleep status after run for one hour, the setting
temperature will decrease 1
℃
, 2 hours, setting temperature will decrease 2
℃
, then the unit will run at this settingtemperature.
Sleep 2 is sleep mode 2, that is air conditioner will run according to the presettinga group of sleep temperature curve.
In Cool mode:
(1) When setting the initial temperature 16
℃
-23
℃
, after turned on Sleep function,the temperature will be increased 1
℃
in every hour,
after 3
℃
the temperaturewill be maintained, after 7hours, the temperature will be decreased 1
℃
, afterthat the unit will keep on running
under this temperature;
(2) When setting the initial temperature 24
℃
-27
℃
, after turned on Sleep function,the temperature will be increased 1
℃
in every hour,
after 2
℃
the temperaturewill be maintained, after 7hours, the temperature will be decreased 1
℃
, afterthat the unit will keep on running
under this temperature;
(3) When setting the initial temperature 28
℃
-29
℃
, after turned on Sleep function,the temperature will be increased 1
℃
in every hour,
after 1
℃
the temperature will be maintained, after 7hours, the temperature will be decreased 1
℃
, afterthat the unit will keep on running
under this temperature;
WiFi button
Press this button, the Quiet status is under the Auto Quiet mode (display" "and "Auto" signal) and Quiet mode (display " " signal)
and Quiet OFF (there is no signal of " " displayed), after powered on, the Quiet OFF is defaulted.Under the Quiet mode (Display " "
signal).
The Quiet function is only available for some models.
NOTE: This function is applicable to partial of models.
