26
Technical Information
Service Manual
6. Function and Control
6.1 Remote Controller Introduction
Set fan speed
Send signal
Turbo mode
8
ć
heating function
Set temperature
Set time X-FAN function
TIMER ON/TIMER OFF
Child lock
Up & down swing
Left & right swing
Light
Temp. display type
:Set temp.
:Outdoor ambient temp.
:Indoor ambient temp.
Sleep mode
Clock
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mode
I feel
Healthy mode
Scavenging functions
Quiet
WiFi
This is a general remote controller.Some
models have this function while some
do not. Please refer to the actual models.
{
6
3
7
9
11
13
15
12
14
16
10
8
5
4
2
1
1
ON/OFF button
2
MODE button
3
FAN button
4
TURBO button
6
button
7
button
9
I FEEL button
14
LIGHT button
15
button
16
TEMP button
11
CLOCK button
12
QUIET button
13
WiFi button
10
TIMER ON / TIMER OFF button
8
SLEEP button
5
▲/ button
▲
This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function, which the
model doesn't have, if press the corresponding button on the remote controller that the unit will keep the original running status.
After putting through the power, the air conditioner will give out a sound. Operation indicator " " is ON (red indicator,the colour is
different for different models). After that, you can operate the air conditioner by using remote controller.
Under on status, pressing the button on the remote controller, the signal icon " " on the display of remote controller will blink
once and the air conditioner will give out a “di” sound, which means the signal has been sent to the air conditioner.
●As for the models with functions of WiFi or wired controller, the indoor unit must has been controlled by standard remote controller under auto
mode first,and then the function of adjustable temperature under auto mode can be realized by APP or the wired controller.
●This remote controller can adjust the temperature under auto mode. When matching with the unit which is without the function of adjustable
temperature under auto mode, the set temperature under auto mode may be invalid, or the displayed set temperature on the unit is not same as
that on the remote controller under auto mode.
