12
● It’s defaulted to display set temperature when turning on the unit.
There is no
display in the remote controller.
● Only for the models whose indoor unit has dual-8 display.
● When selecting displaying of indoor or outdoor ambient temperature, indoor
temperature indicator displays corresponding temperature and automatically turn
to display set temperature after three or five seconds.
Press this button to set clock time. " " icon on remote controller will blink. Press
"▲" or " " button within 5s to set clock time. Each pressing of "▲" or " " button,
clock time will increase or decrease 1 minute. If hold "▲" or " " button, 2s later,
time will c
hange
quickly.
Release
this button when
rea
c
hing
your
required
time.
Note:
● Clock time adopts 24-hour mode.
●
The interval between two operation can’t exceeds 5s. Otherwise, remote contro-
ller will quit setting status. Operation for
TIMER ON/TIMER OFF is the same.
CLOCK butto
n
11
▲
▲
▲
I FEEL
button
9
Press this button to start I FEEL function and " " will be displayed on the remote
controller.
After this function is set, the remote controller will send the detected
ambient temperature to the controller and the unit will automatically adjust the
indoor temperature according to the detected temperature. Press this button again
to close I FEEL function and " " will disappea
r.
● Please put the remote controller near user when this function is set. Do not put
the remote controller near the object of high temperature or low temperature in
order to avoid detecting inaccurate ambient temperature.
LIGH
T button
10
Press this button to turn o
ff display light on indoor unit. " " icon on remote
controller disappears. Press this button again to turn on display light. " " icon is
displayed.
TIMER ON /
TIMER OFF button
12
●
TIMER ON button
"TIMER ON" button can set the time for timer on.
After pressing this button, " "
icon disappears and the word "ON" on remote controller blinks. Press "▲" or
" "button to adjust
TIMER ON setting.
After each pressing "▲" or " " button,
▲
▲
Introduction for buttons on remote controller
