14
For preventing cold air, after starting up heat mode,
indoor unit will delay 1~5 minutes to blow air (Actual
delay time depends on indoor ambient temperature).
Set temperature range from remote controller:
16~30°C(61-86°F).
Fan speed: auto, low speed, low-medium speed,me
-
dium speed, medium-high speed,high speed.
Under auto mode, temperature can be displayed;
Under auto mode, set temperature can be adjusted.
●
●
●
●
button
button
Press this button to turn on the unit. Press this button
again to turn off the unit.
AUTO
COOL
DRY
FAN
HEAT
When selecting auto mode, air conditioner will
operate automatically according to the sensed
temperature. Press "FAN" button can adjust fan
speed. Press " " / " " button can adjust fan
blowing angle.
After selecting cool mode, air conditioner will
operate under cool mode. Press "▲" or "▼"
button to adjust set temperature. Press "FAN"
button to adjust fan speed. Press " " / " "
Press this button to select your required operation
mode.
●
●
button to adjust fan blowing angle.
When selecting dry mode, the air conditioner
operates at low speed under dry mode. Under
dry mode, fan speed can
'
t be adjusted.
●
Press " " / " " button to adjust fan blowing
angle.
When selecting fan mode, the air conditioner will
only blow fan, no cooling and no heating. Press
"FAN" button to adjust fan speed. Press " " /
●
●
N
OTE
Introduction for buttons on
remote controller
button
This button is used for setting Fan Speed in the
sequence that goes from AUTO, , , ,
to ,
It
'
s low fan speed under dry mode.
X-FAN function Hold fan speed button for 2s in cool
or dry mode, the icon " " is displayed and the in-
door fan will continue operation for a few minutes in
order to dry the indoor unit even though you have turn-
ed off the unit. After energization, X-FAN OFF is
defaulted. X-FAN is not available in auto, fan or heat
mode.
This function indicates that moisture on evaporator of
indoor unit will be blowed after the unit is stopped to
avoid mould.
●
●
N
OTE
" " button to adjust fan blowing angle.
When selecting heat mode, the air conditioner
operates under heat mode. Press "▲" or "▼"
button to adjust set temperature. Press "FAN"
button to adjust fan speed. Press " " / " "
button to adjust fan blowing angle.
Auto
then back to Auto.
Low-Medium speed
Medium-High speed
Medium speed
High speed
Low speed
●
●
●
●
This is a general use remote controller. It could be
used for the air conditioner with multifunction. For the
functions which the model doesn't have, if press the
corresponding button on the remote controller, the
unit will keep the original running status.
After putting through the power, the air conditioner
will give out a sound. Power indicator " " is ON.
After that, you can operate the air conditioner by
using remote controller.
Under on status, pressing the button on the remote
controller, the signal icon " " on the display of
remote controller will blink once and the air condition
-
er will give out a "di" sound, which means the signal
has been sent to the air conditioner.
As for the models with functions of WiFi or wired
controller, the indoor unit must has been controlled
by standard remote controller under auto mode first,
and then the function of adjustable temperature
under auto mode can be realized by APP or the
wired controller.
This remote controller can adjust the temperature
under auto mode. When matching with the unit which
is without the function of adjustable temperature
under auto mode, the set temperature under auto
mode may be invalid, or the displayed set tempera
-
ture on the unit is not same as that on the remote
controller under auto mode.
●
N
OTE
