Gree GSA228XA, Руководство пользователя

Страница: 35 / 47

The Quiet function can be set up in all modes; Under the Quiet mode,the fan
speed is not available.
When quiet function is selected:
Under cooling mode: indoor fan operates at notch 4 speed. 10 minutes later or
when indoor ambient temperature≤28
℃
, indoor fan will operate at notch 2 speed
or quiet mode according to the comparison between indoor ambie n t temperature
and set temperature.
Under heating mode: indoor fan operates at notch 3 speed or quiet mode according
to the comparison between indoor ambient temperature and set temperature.
Under dry, fan mode: indoor fan operates at quiet mode.
Under auto mode: the indoor fan operates at the auto quiet mode according to
actual cooling, heating or fan mode.
●
● The Quiet function is only available for some models.
● This function is only available for some models.
button
● This function is applicable to partial of models.
31
Introduction for buttons on remote controller
12
QUIET button
Press this button, the Quiet status is under the Auto Quiet mode (display " " and
"AUTO" signal ) and Quiet mode (display " " signal) and Quiet OFF (there is no
signal of " " displayed), after powered on, the Quiet OFF is defaulted.
14
LIGHT button
Press this button to turn off display light on indoor unit. " " icon on remote
controller disappears. Press this button again to turn on display light. " " icon is
displayed.
15
Press this button to achieve the on and off of health and scavenging functions in
operation status. Press this button for the first time to start scavenging function;
LCD displays " ". Press the button for the second time to start health and
scavenging functions simultaneously; LCD displays " " and " " . Press this
button for the third time to quit health and scavenging functions simultaneously.
Press the button for the fourth time to start health function; LCD display " " .
Press this button again to repeat the operation above.
Note:
●
13
WiFi button
(Not available)
Press "
WiFi
" button to turn on or turn off WiFi function. When WiFi function is
turned on, the "
WiFi
" icon will be displayed on remote controller; Under status
of unit off, press "MODE" and "
WiFi
" buttons simultaneously for 1s, WiFi module
will restore to factory default setting.