16
9. Insert joint A of heat discharge pipe into the gr-
oove until you hear a sound.
Window adapter(bottom)
Window adapter(top)
7.
pter(bottom).
Installation of Heat Discharge Pipe
Connect Window adapter(top) to Window ada-
8.
10.
Joint A
Heat discharge pipe
Slide and open the exhaust cover on the window
panel, and attach the window adapter.
Rotate joint A and joint Window adapter(top) +
Window adapter(bottom) into the two ends of
heat discharge pipe.
Window adapter(top)
Window adapter(bottom)
2.
with screws.
Optional 2-2:
Installation in a sliding sash window
Cut the sponge A (adhesive type) to the proper
length and attach it to the window frame and to the
side of sash.
20.5" (520mm)
(1) Open the window sash and place the window
The window panel cannot be installed in windows less
than 20.5" (520mm) high, as you will be unable to shut
the exhaust cover.
panel on the window frame.
(2) Secure the window panel to the window frame
1. Attach the insect guard net to the window panel.
Sponge A
3.
Cut
Window panel
Install the window panel into the window frame.
Make sure that the exhaust cover is attached to
the window panel.
Inner height of the window:20.5"(520mm)
Use the window panel.
(1) Open the window sash and place the window
Exhaust cover
panel on the window frame.
(2) Slide the adjustment panel to fit the window frame
Inner height of the window:20.5" (520mm)- 38.5"
(980mm) Use the window panel and the adjustment
panel.
with screws.
height.
(3) Secure the window panel to the window frame
Groove
joint A
