-1 -
1
In cool mode, it can decrease the temperature of the room, and make people very comfortable.
OPERATING INSTRUCTIONS
l.
3.Mode Button
4.Fan speed Button
When the unit is running in Cool or Fan mode, press the Fan speed Button to select the fan speed
in High, Middle, Low, Auto.
ON/OFF Button
2. "+","-" Button
Receiver window
LED window
DRY mode lamp
Temperature selection button
COOL mode lamp
MODE button
FAN mode lamp
FAN Speed lamp
ON/OFF button
Fan speed button
CONTROL PANEL DISPLAY & OPERATING INSTRUCTIONS
6.Louver Direction
This unit has 4-Way directional louvers.
Use the louver guides to direct air where
cooling or fanning is needed most.Hold the
louver and adjust the air flow direction,
as show in the right diagram.
5.Water Full
When COOL or DRY is running, condensate will drain to water tank. When water tank is filled.
Buzzer will sound 8 times, LED screen show error code ‘H8’.
In this case, reference page 8 to drain out water intank.
Press the button once to manually turn the unit on. Press once more to turn the unit off.
Press Mode Button repeatedly to cycle between the modes:Cooling,Dry,and Fan only mode.
Each press of the Mode button will light up a different lamp on the control panel. The exhause
hose and window kit must be installed when the unit is in Cool or Dry mode.When using the unit
as a fan,it is unnecessary to keep the exhaust hose and window kit connected to the unit.
Hold this hand grip to adjust the
direction of Horizontal Louvers
Hold this hand grip to adjust the
direction of Vertical Louvers
CONTROL PANEL & DISPLAY
When pressing key is valid,buzzer makes a sound,indicated lamp indicates relevant state,system will last
for 2 seconds.
In COOL mode, press "-" once, the set temperature will decrease 1
, press "+" once, the set
temperature will incresae 1
30 ( 61 to 6
8
).
to
℃
℃
℃
(
℉
)
℃
(
℉
).
℉
℉
The set temperature range from 16
Med
High
Fan
speed
Low
Auto
ON/OFF
Cool
Dry
Mode
Fan only
-
+
