background image

 

 

To Users 

Thank you for selecting Gree’s  product. Please read this instruction manual carefully before 

installing and using the product, so as to master and correctly use the product. In order to guide you 

to correctly install and use our product and achieve expected operating effect, we hereby instruct as 

below: 

(1)  This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been 

given supervision or instruction concerning use of the appliance by a person responsibility 

for their safety. Children should be supervised to ensure that they do not play with the 

appliance. 

(2)  In order to ensure reliability of product, the product may consume some power under stand-

by status for maintaining normal communication of system and preheating refrigerant and 

lubricant. If the product is not to be used for long, cut off the power supply; please energize 

and preheat the unit in advance before reusing it. 

(3)  Please properly select the model according to actual using environment, otherwise it may 

impact the using convenience. 

(4)  This product has gone through strict inspection and operational test before leaving the factory. 

In order to avoid damage due to improper disassembly and inspection, which may impact the 

normal operation of unit, please do not disassemble the unit by yourself. You can contact with 

the special maintenance center of our company if necessary. 

(5)  When the product is faulted and cannot be operated, please contact with our maintenance 

center as soon as possible by providing the following information. 

1)  Contents of nameplate of product (model, cooling/heating capacity, product No., ex-

factory date). 

2)  Malfunction status (specify the situations before and after the error occurs). 

(6)  All the illustrations and information in the instruction manual are only for reference. In order 

to make the product better, we will continuously conduct improvement and innovation. We 

have the right to make necessary revision to the product from time to time due to the reason 

of sales or production, and reserve the right to revise the contents without further notice. 

(7)  The final right to interpret for this instruction manual belongs to Gree Electric Appliances Inc. 

of Zhuhai. 

Содержание GMV series

































Отзывы: