Gree GMV-ND112ZD/B-T, Руководство пользователя

Страница: 5 / 27

Multi Variable Air Conditioners Floor and Ceiling Type Indoor Unit
1
1 Safety Notices (Please be sure to abide)
WARNING: If not abide them strictly, it may cause severe damage to the unit or the
people.
NOTICE: If not abide them strictly, it may cause slight or medium damage to the unit or
the people.
This sign indicates that the items must be prohibited. Improper operation may cause
severe damage or death to people.
This sign indicates that the items must be observed. Improper operation may cause
damage to people or property.
WARNING!
This product can’t be installed at corrosive, inflammable or explosive environment or the place
with special requirements, such as kitchen. Otherwise, it will affect the normal operation or
shorten the service life of the unit, or even cause fire hazard or serious injury. As for the above
special places, please adopt special air conditioner with anti-corrosive or anti-explosion function.
Follow this manual to complete
the installation work. Please
read this manual carefully
before turning on or repairing
the unit.
Installation should be
conducted by the dealer or
qualified personnel. Please
do not attempt to install the
air conditioner by yourself.
Improper installation may
lead to water leakage,
electric shock or fire hazard,
etc.
Before installation, please
check whether the power
supply is complied with that
specified on the nameplate and
check the safety of the power
supply.
The air conditioner must be
grounded reliably for
avoiding electric shock.
Please do not connect the
earthing wire to gas pipe,
water pipe, lightning rod or
telephone line.
Be sure to use special
accessories and parts for
installation to prevent water
leakage, electric shock and fire
hazard, etc.
If refrigerant leakage
happens, please ventilate
the room immediately.
Diameter of power cord should
be large enough. The damaged
power cord and connection wire
must be replaced with special
cables.
When the power cord is
connected, please fix the
electric box cover properly to
avoid safety accidents.
Never fail to comply with the
nitrogen-charging welding
process. Do charge nitrogen
when welding the pipes.
Never short circuit or cancel
the pressure switch to
prevent unit damage.