background image

 

 

Preface

 

For correct installation and operation, please read all instructions carefully. Before reading the 

instructions, please be aware of the following items: 

 

(1)  Instructions for installation and use of this product are provided by the manufacturer.   

(2)  Installation must be performed in accordance with the requirements of NEC and CEC by authorized personnel 

only. 

(3)  For the safe operation of this unit, please read and follow the instructions carefully. 

(4)  During operation, total capacity of indoor units should not exceed the total capacity of outdoor units. otherwise, 

poor effect of cooling or heating may result. 

(5)  Direct operators or maintainers should well keep this manual. 

(6)  If this unit fails to operate normally, please contact our service center as soon as possible and provide the 

following information:     
1)  Content on the name plate (model number, cooling capacity, production code, ex-factory date). 
2)  Malfunction details (before and after the malfunction occurs). 

(7)  Each unit has been strictly tested and proved to be qualified before ex-factory. In order to prevent units from 

being damaged or operating normally because of improper disassembly, please do not disassemble the unit by 
yourself. If you need to disassemble and check units, please contact our service center. We will send specialists 
to guide the disassembly. 

(8)  All graphics in this manual is only for your reference. For sales or production reasons, these graphics are subject 

to change by manufacturer without prior notice. 

(9)  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction 
concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure 
that they do not play with the appliance. 

User Notice 

 

DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such 

waste separately for special treatment is necessary.   

Содержание GMV-ND07PLS/B-T



























Отзывы: