22
© Copyright, GREE Canada, 2021
Step 1: Install top mounting rail
1) Tear off the paster at back side of top mounting rail seal strip, and then align it at
the bottom edge of top mounting rail to stick the top mounting rail seal strip at the
bottom of top mounting rail. (The top mounting rail seal strip has been stick on the top
mounting rail for some models. Therefore, this step can be omitted.)
Step 2: Install accordion panel
1) Stick one accordion panel seal respectively on the left side and right side of accordion
panel installation frame, as shown in the figure.
Installation procedure
Top mounting rail
Top mounting rail seal strip
2) Use 4 type A screws to fix the top mounting rail at the outer case of air condition.
(The top mounting rail has been fixed on the conditioner for some models. Therefore,
this step can be omitted.)
2) Undraw the accordion panel, install the accordion panel marked with “LEFT” “RIGHT”
at both sides of air conditioner in turn. Slide the upper and lower ends of accordion
panel into top mounting rail and lower guide rails.
