Gree GJC08BS-A6NRNJ1B, Руководство по установке

Страница: 7 / 22

7
3. AIR CONDITIONER INSTALLATION
3.1. PRE-INSTALLATION INFORMATION
CAUTION : When handling the unit, take care to avoid cutting yourself on the sharp metal edges
and aluminum fins of the front and rear coils.
WARNING :
▪ Observe all electrical codes and ordinances.
▪ Do not use damaged or non-standard power cords.
▪ Use caution during installation and maintenance.
▪ Use proper operation to avoid electric shock, accidents, and other hazards.
▪ Proper installation is the responsibility of the installer. Incorrect installation will void the warranty.
▪ All parts described must be used without any substitution.
IMPORTANT
▪ Keep these instructions for future reference. Product failure due to improper installation is not covered
by the one-year limited warranty.
▪ You MUST use the supplied installation parts and proper installation procedures as described in this
manual when installing this unit.
Locations to Avoid
Installing the unit in the following locations may be dangerous and may cause malfunctions :
▪ Areas with strong heat sources, vapours, flammable or explosive gases, sulphate gases or volatile
objects are released into the air.
▪ In the vicinity of high-frequency devices such as welding machines, medical equipment, etc.
Electrical Connection Requirements
▪ Follow the recommendations of the Electrical Safety section previously seen in this manual when in-
stalling the unit.
▪ Use a qualified electrical circuit in accordance with local safety regulations.
▪ Do not plug the unit into a loose or damaged electrical outlet. Doing so may result in electric shock.
▪ Ensure that the power supply complies with the requirements of the air conditioner. An unstable power
supply or improper wiring may result in electric shock, hazard or malfunction. The electrical requirement
for this product is 115 V / 60 Hz.
▪ Do not connect the unit to the power outlet before completing the installation.
▪ Ensure that the outlet is effectively grounded at all times, otherwise it may cause electric shock. The
grounding resistance must comply with national electrical safety regulations.