12
© Copyright, GREE Canada, 2017
4
5
6
7
FAN button:
Use this button to adjust the fan speed in the following order:
I FEEL button :
I feel function will be action if pressing this button. If controller receives I FEEL order,
it will work under ambient temperature value which sending by remote controller,
and remote controller will send ambient temperature value to controller every 10min.
After 11min, if controller does not receive ambient temperature value which sending
by remote controller, it will run with AC ambient temperature; if I FEEL is not set,
ambient temperature will adopt sampling value of AC temperature sensor. If power off
happens, this function will not be memorized.
SLEEP button:
Press this button to go into the SLEEP operation mode. Press it again to cancel
this function. This function is available in COOL, SAVE, HEAT (Only for models with
heating function) or DRY mode to maintain the most comfortable temperature for you.
TIMER button:
Press this button to initiate auto-on/auto-off timer. To cancel auto-timer program,
press this button twice.
Light function:
Under switch-on or switch-off state, you may hold “
▲
”and “ ” buttons simultaneously
for 3 seconds to set the lamp on or off and send the code. After being energizedthe lamp is
defaulted on.
Child lock function:
Press “
▲
” and “
▼
” buttons simultaneously can turn on or turn off child lock function.
When child lock function is started up, LOCK indicator on remote controller is ON. If you
operate the remote controller, remote controller won’t send signal.
Temperature display switch over function:
Under OFF status, press “
▼
” button and “ ” button simultaneously can switch between
°C and °F.
1) Press the mark “ ” on back cover of batteries box cover for remote controller with
fingers as shown in the fig, and then remove the batteries box cover along the arrow
direction.
2) Replace with two (AAA 1.5V) dry batteries. Make sure positions for “+” pole and “-”
pole are correct.
3) Reinstall batteries box cover.
Auto
Speed 1
Speed 2
Speed 3
Speed 4
NOTE:
There are 3 speeds for the Fan Speed of this model.
FUNCTION INTRODUCTION FOR COMBINATION BUTTONS
REPLACEMENT OF BATTERIES IN REMOTE CONTROLLER
