15
© Copyright, GREE Canada, 2021
© Copyright, GREE Canada, 2021
CARE AND CLEANING
Normal sounds
When your air conditioner is operating normally, you may hear sounds such as:
1) Droplets of water hitting the condenser, causing a pinging or clicking sound. The water droplets help
cool the condenser.
2) Air movement from the fan.
3) Clicks from the thermostat cycle.
4) Vibrations or noise due to poor wall or window construction.
5) A high-pitched hum or pulsating noise caused by the modern high-efficiency compressor cycling on
and off.
Cleaning the front panel
1) Unplug air conditioner or disconnect power.
2) Clean front panel with a soft, damp cloth.
3) Air dry front panel completely.
4) Plug in air conditioner or reconnect power.
Annual Maintenance
Your air conditioner needs annual maintenance to help ensure steady, top
performance throughout the year. Call your local authorized dealer to schedule
an annual checkup. The expense of an annual inspection is your responsibility.
Cleaning the air filter
Model 1:
1) Turn off air conditioner.
2) Remove air filter by sliding filter out from
either side of unit. Filter may be removed from
either side.
3) Use a vacuum cleaner to clean air filter. If air
filter is very dirty, wash it in warm water with
a mild detergent. Do not wash air filter in the
dishwasher or use any chemical cleaners.
Air dry filter completely before replacing to
ensure maximum efficiency.
4) Replace air filter by sliding filter back into
either side of unit.
Repairing paint damage
Check once or twice a year for paint damage. This is very important, especially
in areas near oceans or where rust is a problem. If needed, touch up with a good
grade enamel paint.
Note:
To reduce paint damage during the winter, install a heavy-duty cover over air
conditioner cabinet. For information on ordering a heavy-duty cover, see “Accessories”.
Your new air conditioner is designed to give you many years of dependable service.
This section tells you how to clean and care for your air conditioner properly. Be sure
to unplug the unit before cleaning to prevent shock or fire hazards.
Model 2:
1) Remove air filter by pulling down on the
indents in the top or sides of filter door and
sliding air filter up and out. Filter door is not
removable.
2) Use a vacuum cleaner to clean air filter. If air
filter is very dirty, wash it in warm water with
a mild detergent. Do not wash air filter in the
dishwasher or use any chemical cleaners.
Air dry filter completely before replacing to
ensure maximum efficiency.
3) Replace air filter by sliding filter down into
filter door and closing filter door.
Filter may be removed from either side
Indents
Indents