10
Introduction for buttons on remote controller
FAN button/X FAN button
3
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5
minutes to blow air (actual delay time is depend on indoor ambient temperature).
● Set temperature range from remote controller: 16~30
℃
(61-86°F);
Fan speed: auto, low speed, low-medium speed,medium speed, medium-high
speed,high speed.
TURBO button
4
Under
COOL o
r
HEAT
mode
,
press
t
his
button to tu
r
n to
quic
k COOL o
r
quic
k
HEAT
mode. " " icon is displayed on remote controller. Press this button again
to exit turbo function and " " icon will disappear.
If
start
this
function,
the
unit
will
run
at
super-high
fan
speed
to
cool
or
heat
quickly
so that the ambient temp. approachs the preset temp. as soon as possible.
▲
▲/ button
5
● Press "▲" or " " button once increase or decrease set temperature 1
℃
(°F).
Holding "▲" or " " button, 2s later, set temperature on remote controller will
change quickly. On releasing button after setting is finished, temperature indica-
tor on indoor unit will change accordingly. (
T
emperature can’t be adjusted under
▲
▲
This button is used for setting Fan Speed
in the sequence that goes from AUTO,
to
then back to Auto.
,
,
,
,
Auto
Medium speed
Low-Medium speed
Low speed
High speed
Medium-High speed
● It’s Low fan speed under Dry mode.
This function indicates that moisture on
evaporator of indoor unit will be blowed
after the unit is stopped to avoid mould.
Having set X-
F
AN function on:
After turning off the unit by pressing ON/OFF
button indoor fan will continue run
n
ing for a few minutes. at low speed. In this
period, Hold fa
n
speed
button
f
o
r
2s to stop indoor fan directly.
Having set X-
F
AN function off:
After turning off the unit by pressing ON/OFF
button, the complete unit will be off directly.
X-
FAN
f
un
c
t
i
on
Hold fa
n
speed
button
f
o
r
2s
i
n COOL o
r
D
RY
mode
, t
he
ic
on “ ”
is
displayed
and
t
he
indoor fa
n
will
c
ont
inue
opera
t
ion
f
o
r
a few
mi
nut
es
i
n
order
to
dry
t
he
ind
oo
r
un
i
t
eve
n
though you have turned off the unit.
After energization, X-FAN
OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
●
●
●
Note:
