41
Service Manual
Installation and Maintenance
spots weld
suction pipe
discharge pipe
Procedure
Step
nuts with washer
compressor
15.Remove suction pipe and discharge pipe
16.Remove compressor
17.Remove support assembly
18.Remove caster wheel
19.Remove facing-piece assembly
Remove suction pipe and discharge pipe
from the unsoldering place of compressor
(Note: Discharge the refrigerant first
before unsoldering.).
Unscrew 3 foot nuts with washer fixing
compressor by wrench to remove
compressor.
Pull the castor whee then remove it,
Remove the other three castor wheels by
the same method.
1. Remove duct
Unscrew 5 screws fixing duct to remove
the duct.
Unscrew 4 screws fixing support
assembly to remove support assembly.
screws
screws
caster wheels
