4
SAFETY INFORMATION
The power cord with this air conditioner contains a current detection device designed to
reduce the risk of fire. Please refer to the section “operation of current device” for details. In the
event that the power cord is damaged, it cannot be repaired. It must be replaced with a power
cord from the product manufacturer.
NOTE:
If you turn off the air conditioner, wait at least three MINUTES before turning it back on. This
prevents the unit from blowing a fuse or tripping a circuit breaker.
Operation of Current Device
The power cord contains a current device that senses damage to the power cord. To test your power cord, do the
following:
1. Plug in the Air Conditioner.
2. The power cord has TWO buttons on the 3-Prong Grounding Plug. Press the TEST button. You will notice a
click as the RESET button pops out.
3. Press the RESET button, and you will hear a click as the button engages.
4. The power cord is now supplying electricity to the unit.
(On some products this is also indicated by a light on
the
3-Prong Grounding Plug
)
.
NOTE:
• Do not use the power cord to turn the unit on or off.
• Always make sure the RESET button is pushed in for correct operation.
• The power cord must be replaced if it fails to reset when either the TEST button is pushed,
or it cannot be reset. Please contact Customer Service.
• If the power cord is damaged, then it cannot be repaired. It MUST be replaced with a new power cord.
Please contact Customer Service.
Power Cord with 3-Prong
Grounding Plug and Current
Detection Device.
•
The power cord is equipped with a 3-Prong Grounding Plug which
can only be used with a standard 3-prong wall outlet to minimize the
possibility of electric shock hazard. Where a 2-prong outlet is
encountered, it is your responsibility to have it replaced with a properly
grounded 3-prong wall outlet.
• Do not use a power cord that shows damage or cracks along the
length or at the connector. A damaged power cord should be replaced
with a new cord obtained from the manufacturer. Please contact
Customer Service for replacement options.
• Do not modify power cord length or share an outlet with another
appliance. This may cause electric shock or fire.
• Always use a dedicated power circuit. The voltage on the outlet
should match the voltage rating on the rating plate.
• Do not use the outlet if it is loose or damaged. It may cause electric
shock.
• Never use an extension cord, surge protector, or multi-outlet adapter
with this unit.
SAFETY INFORMATION
Electrical Information
Do not under any
circumstances cut,
remove, or bypass the
grounding prong
