9
To install the
Window Sash Seal
, cut the seal to
fit the length of the window. Peel off the backing,
and attach to window sash and window sill.
Place the air conditioner on the sill with the
Lower
Guide Rail
against the back edge. Center the unit,
and close the window securely behind the
Upper
Guide Rail
. The unit should be slightly tilted to the
outside. Use a level: about 1/3 bubble will show
correct slant.
To install the fixed bracket, attach the bracket to the
window side sash with
1 Type B Screw
. This prevents
broken glass or damage to the windows.
Front View
Side View
Vinyl
Window
Wooden
Window
NOTE:
Top Rail and sliding panels at each side are offset to provide the proper pitch to the
rear of .8 cm (5/16”). This is necessary for proper condensed water utilization and drainage. If
you are not using the side panels for any reason, this pitch to the rear must be maintained.
5
6
8
Note:
To install the air conditioner onto
the window sill, it is recommended to use 2
PEOPLE.
INSTALLATION INSTRUCTIONS
NOTICE:
This picture is for reference only. Please refer to the actual product for the appearance.
BACK
FRONT
Upper Guide
Rail
Lower Guide
Rail
Window Frame
Horizontal or inclined about 3°
Extend the left and right
Flexible Screens
to the
window sashes. Install
2 Type B Screws
in holes in the
upper
Flexible Screen
Frame and
1 Type B Screw
into middle of Upper Guide Rail. Attach bottom of the
Flexible Screen
Frame to the window sill, with
2 Type
B Screws
.
Note:
In order to prevent the window
sill from splitting drive the pilot holes before
inserting the screws.
Window
Sill
Window
Frame
Type B Screws (2)
Type B Screws (3)
7
