22
Remove Collected Water: Continuous
Drainage Lower Hole Option
During cooling or drying operations, water will condense and drain into the chassis. When the chassis is
full with water, a buzzer will sound and “H8” will display on the unit.
•
Move the unit to a suitable place, keep the unit horizontal.
•
Take the
Drainage Pipe
from the
Pipe Clip
, and pull out the
Rubber Plug
in the
Drainage Pipe
to
discharge the water.
•
After discharging the water, replace the
Rubber Plug
in the
Drainage Pipe
and then place the
Drainage Pipe
onto the
Pipe Clip
.
•
After the water is removed, and the compressor has been stopped for 3 minutes, the unit will resume
operation.
CLEANING AND MAINTENANCE
NOTICE:
This picture is for reference only. Please refer to the actual product for the appearance.
