Gree CB11500430, Руководство по обслуживанию, Страница: 25 / 67

Installation Manual
Safety Precautions for Electrical Wiring
Earthing requirements
Installation Site of Outdoor Unit
1. Where QRLVHDQGRXWIORZDLUHPLWWHGE\XQLWZLOOQRW annoy neighbors.
W KHUHWKHUH is VXIILFLHQWYHQWLODWLRQ
W
KHUHWKHUH
is
QRREVWUXFWLRQ
blocking
WKH
air
LQOHW
or
RXWOHW
.
Where it is
DEOHWRZLWKVWDQGWKHIXOOZHLJKWDQGYLEUDWLRQ
.
Where it is dry and the unit is not exposed to direct sunshine or strong wind
0DNHVXUHWKDWWKHRXWGRRUXQLW
is installed in accordance with the installation instructions, and is convenient for maintenance and repair.
KHLJKWGLIIHUHQFH
between indoor and outdoor units is within 16ft, and the length of the connecting tubing does not exceed 32ft.
W
KHUHLWLVRXWRIUHDFK
of
FKLOGUHQ
5. The minimum distance between the unit and combustive surface is 5ft.
A dedicated power supply circuit should be used in accordance with local electrical safety regulations.
2. 'RQWGUDJWKHSRZHU cord.
3.
The appliance shall be installed in accordance with national wiring regulations.
An all-pole disconnection switch having a contact separation of at least 1/8inch in all poles should be connected in fixed wiring.
The unit
VKRXOGEHUHOLDEO\ HDUWKHG DQG FRQQHFWHGWR
an exclusive
HDUWKGHYLFH
by the
SURIHVVLRQDO
s
4.
7KHDLUVZLWFK PXVWKDYHWKHIXQFWLRQVRI PDJQHWLFWULSSLQJDQGKHDWWULSSLQJ to prevent VKRUW FLUFXLW DQG RYHUORDGLQJ
ķ
ĸ
Ĺ
ĺ
$LUFRQGLWLRQHULVW\SH
I
HOHFWULFDSSOLDQFH
. P
OHDVH
ensure the the unit is reliably earthed.
7KH\HOORZJUHHQ ZLUH LQ DLU FRQGLWLRQHULV
the
HDUWKLQJZLUH
which
FDQ QRWEHXVHG IRURWKHUS
ur
SRVH
s
Improper earthing may cause electric shock.
7KHHDUWKUHVLVWDQFHVKRXOGDFFRUGWRWKH
n
DWLRQDO
c
ULWHULRQ
7KHXVHU 's SRZHUPXVW have UHOLDEOHHDUWKLQJWHUPLQDO3OHDVHGRQWFRQQHFWWKH earthing wire with
WKHIROORZLQJ
:
W
DWHUSLSH
*DV SLSH
&RQWDPLQDWLRQSLSH
2WKHUSODFHWKDWSURIHVVLRQDOSHUVRQQHOFRQVLGHU
is
XQUHOLDEOH
5 The model and rated values of fuses should accord with the silk print on fuse cover or related PCB.
6.
7.
2.
3.
4.
5.
6.
7.
8.
9.
Install the outdoor unit:
Where the
Where the unit does not have negative impact on pedestrian or city amenity.
CAUTION
!
EQUIPMENT DAMAGE HAZARD
Failure to follow this caution may result in equipment
damage or improper operation.
S
Be sure to comply with local codes while running wire
from indoor unit to outdoor unit.
S
Every wire must be connected firmly. Loose wiring may
cause terminal to overheat or result in unit malfunction.
A fire hazard may also exist. Therefore, be sure all wiring
is tightly connected.
S
No wire should be allowed to touch refrigerant tubing,
compressor or any moving parts.
S
Disconnecting means must be provided and shall be
located within sight and readily accessible from the air
conditioner.
S
Connecting cable with conduit shall be routed through
hole in the conduit panel.
NOTE : Polarity of power wires must match original
connection on outdoor unit.
22