12
Maintenance
Service Manual
1. Nip the groove at both sides of bucket and pull the bucket out by the arrow shown direction.(As shown in Fig.a)
2.Take out accessory box. (There are 4 castors,As shown in Fig.b)
3.Refit the bucket by the arrow shown direction, then the unit is ready to be electrified and turned on. (As shown in Fig.c)
4.Take out 4 castors from accessory box.
5.Tilt the dehumidifier no more than 45°. Aim the shaft of castor at the installation hole on chassis, and then forcibly push the
castor upward to let the locating ring on the shaft of castor stick together with the side face of installation hole. (refer to Fig.d)
6.Install the 4 caster wheels on the dehumidifier.
NOTE:
1. Keep the dehumidifier balance during installation incase the dehumidifier falls.
2. Four caster wheels must be installed well before operating the unit.
Installation of caster whell
Fig.a
Fig.b
Fig.d
Fig.c
Bucket
accessory box
locating ring on
the shaft of castor
a ≤ 45°
