8
Technical Information
Service Manual
6.Function and Control
6.1 Control Panel Instruction
7
4
3 8
2
5
6
1
clean the filter
indicator light
Bucket full light
indicates bucket
needs to be emptied
or it is not in the
proper place
sleeping
space
mode on
indicator
light
timer on
indicator
light
lock on
indicator
light
high, mid
and low fan
indicator light
living space
mode on
indicator
light
power on
indicator
light
continuous operation
on indicator light
basement
mode on
indicator
light
Notes:
● Water bucket must be correctly installed for the dehumidifier to operate.
● Do not remove the bucket while unit is in operation.
● If you want to use drain hose to drain water away, please install the hose according to section "Drainage method".
● Each time pressing the effective button on the control panel will give out a "beep" sound.
● When power is connected, power indicator on the control panel will be on and dehumidifier gives out a "beep" sound simultaneously.
Basic Functions of the Buttons
1
POWER Button
Press this button to turn on/off dehumidifier.
1
+/- Button
Under free drying mode press these buttons to adjust set humidity. Invalid under other modes.
● Pr button will increase humidity while pressing - button will decrease humidity. The display range of humidity is 35%~80%.
Each pressing will increase/decrease humidity by 5%.
● When setting Timer On or Timer Off, press these buttons to adjust time. For specific details, please refer to Timer Button
description below.
● When unit is in operation, h and - button simultaneously for 3s can lock buttons. If this function is turned on, Button Locked
Indicator will be on and display window shows LC, which will blink for 3 times. Then ambient humidity is displayed again. To turn off
this function, hold + and - button simultaneously for 3s and the indicator will be off.
2
Pressing this button can set fan speed circularly as: High, Medium, Low. Corresponding indicator will be on for each fan speed.
FAN SPEED Button
3
Press this button to set Timer On or Timer Off (Timing range 0.5~24h).
● Set Timer Off:
When unit is on, press this button and the Timer Indicator will be on while display window will show the timing figure. Pr or
- button each time will increase or decrease the time by 0.5h or 1h (When figure varies within10h, pr/- button will increase/
decrease the time by 0.5h; when figure varies from 10h to 24h, pr/- button will increase/decrease the time by 1h). When time
is set, wait for 5s or press this button to turn this function on. Timing Indicator will be on.
● Cancel Timer Off:
Under the condition that this function is turned on, press this button to cancel it. Timing Indicator will be off.
TIMER Button
4
