GReddy PRofec B-specII, Инструкция по эксплуатации

Страница: 3 / 23

Please read Important Information
2
¥ Never tune the Profec B-spec II on public highway. This may be
dangerous to you as well as others on the road.
¥ When tuning and operating the vehicle in a garage, be sure that the
garage is equipped with a proper ventilation system.
¥ After installation and tuning, be sure to clean up everything that
would interfere with the driver. Tools and/or wires may interfere with
the driver and may
cause accidents.
Caution
Improper tuning of the Profec B-spec II may cause damage to the
engine.
GReddy Performance Products, Inc. will not be responsible for any
damage caused by improper installation or tuning.
Tuning should be performed only by a experienced technician who
fully understands the vehicle s turbo system and fuel management
requirement for the engine being tuned.
Always use a proper air/fuel ratio meter when tuning the Profec
B-spec II to ensure safe boost level.
Installation of this product requires modification of the vehicle s
electrical system.
When making wire connections, be sure to remove the key from the
ignition, and disconnect the negative terminal of the battery.
Never short out the system. It can damage the unit as well as the
vehicle s electrical system.
Read and fully understand the wiring diagram before making any
wire connection.
When connecting the connectors, push it in all the way until you hear
them click in together.