GReddy PRofec B-specII, Инструкция по эксплуатации

Страница: 20 / 23

19
PEAK
This mode is used to display the PEAK boost recorded.
Recorded peak value will not be cleared even if the battery is disconnected.
PEAK boost display
Turn SET
Clear
Boost display
How to clear the PEAK value
1. While in Boost display, press the SET knob 5
times to show the current PEAK boost recorded.
* it will return to boost display mode after 4 sec.
2. With in 4 sec, press the SET knob for 1 sec to
clear the recorded PEAK boost, then it will return
to boost display.
19
LAST BOOST
LAST BOOST mode
Turn SET
Press SET
Change
Confirm
Boost display
This mode is used to display the last boost that was recorded every time
the accelerator was released for 3 sec.
How to turn this feature ON and OFF.
1. While in Boost display, press the SET knob 6
times to show the current LAST BOOST setting.
* it will return to boost display mode after 4 sec.
2. With in 4 sec, turn the SET knob to turn ON or
OFF.
* If the MODE switch is pressed while in the
this mode, it will cancel out and return back to
pervious setting.
3. Press the SET knob to confirm the setting and it
will return to Boost display.