GReddy Full Auto Timer, Инструкция по эксплуатации

Страница: 11 / 28

Operation Check
Parking Brake Safety Feature Operation Check
10
P+S
P+S
This shows P-1
selected.
Count down begins.
During count down,
release the parking
brake.
Pull the Parking brake.
After 2 sec. default
value will display.
Turn off the ignition
switch.
Engage parking brake.
Manual Transmission: Place into
Neutral
Automatic Transmission: Place
into Park.
Start the engine. Make sure the
Turbo Timer powers up with the
music and display lights operating.
(note: The Turbo Timer may be turned
"Off" if so, press the "POWER" button
once to turn on the unit)
Press P + S to select to "P-1" or
"P-2" Mode.
1’00" will show in display.
First depress the brake pedal, so
that the car does not roll, then turn
the ignition "Off" with the key switch.
The Turbo Timer will then give a
warning "beep" and display "Sid"
Next the unit should begin the
counting-down mode.
Reengage the Parking Brake.
Check to see if the "Sid" display
disappears and the unit continues
to count-down.
Now release the Parking Brake.
the count down should stop and
"OFF" displayed. Then the Timer
and engine should immediately turn
off.
(1)
(2)
(3)
(4)
(5)
(6)
(7)