Grech Motors EG40, Руководство пользователя

Страница: 44 / 87

GRECH MOTORS
44
the B-pillar or the edge of the driver’s door. The cold
inflation pressure should never be set lower than the
recommended pressure on the vehicle label. The tire
suppliers may have additional markings, notes or
warnings such as standard load or radial tubeless.
Additional Information Contained on the Tire
Sidewall for LT Type Tires
Note: Tire Quality Grades do not apply to this type of
tire.
LT type tires have some additional information
beyond those of P type tires. These differences are
described below.
A.
LT:
Indicates a tire, designated by the Tire and
Rim Association, that is intended for service on light
trucks.
B.
Load Range and Load
Inflation Limits:
Indicates the tire’s load-carrying
capabilities and its inflation limits.
C.
Maximum Load Dual lb (kg) at psi (kPa)
cold:
Indicates the maximum load and tire pressure
when the tire is used as a dual;
defined as four tires on the rear axle (a total of six or
more tires on the vehicle).
D.
Maximum Load Single lb (kg) at psi (kPa)
cold:
Indicates the maximum load and tire pressure
when the tire is used as a single; defined as two tires
(total) on the rear axle.
Information on T Type Tires
Wheels and Tires