Greatneck 80155, Инструкция по эксплуатации

Страница: 18 / 21

18
WARNING:
W hen s ervicing, us e only
identical replacement parts . Us e of any
other part may create a hazard or caus e
product damage.
DO NOT abus e power tools . Abus ive
practices can damage the tool as well as
the workpiece.
WARNING:
DO NOT attempt to
modify tools or create accessories. Any
such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious
injury. It will also void the warranty.
CLEANING
DO NOT
us e s olvents when cleaning
plas tic parts . Mos t plas tics are s us ceptible
to damage from various types of
commercial s olvents and may be damaged
by their us e. Us e a clean cloth to remove
dirt, dus t, oil, greas e, etc.
WARNING:
Do not at any time
allow brake fluids, gasoline, petroleum-
based products, penetrating oils, etc. to
come in contact with plastic parts. They
contain chemicals that can damage,
weaken or destroy plastic.
WARNING:
Always wear safety
goggles or safety glasses with side
shields during all cutting operations. It
is critical that you also wear safety
goggles or safety glasses with side
shields and a dust mask while blowing
dust out of the saw with an air jet.
Failure to take these safety precautions
could result in permanent eye or lung
damage.
LUBRICATION
All of the bearings in this reciprocating s aw
are lubricated with a s ufficient amount of
high-grade lubricant for the life of the unit
under normal conditions . T herefore, no
further lubrication is required.
!
!
!
!
MAINTENANCE