Greatneck 80155, Инструкция по эксплуатации

Страница: 11 / 21

11
INSTALLING BLADE
WARNING:
Always remove the
plug from the power supply before
installing or removing blades.
1. Ins ert the 4 mm hex key (1) into the
blade clamp s et s crew (2) and turn it
counter-clockwis e to loos en the blade
clamp (3) (F ig. 1).
2. F ully ins ert the appropriate blade (4)
into the s lot (5) in the center of the
blade clamp.
NOTE:
Make s ure the blade is fully
ins erted into the blade clamp and the
blade teeth are pointing downward.
3. W hile holding the blade fully into the
blade holder, tighten the blade clamp
s et s crew clockwis e with the 4 mm
hex key.
NOTE:
T ighten the blade clamp s et
s crew firmly to lock the blade in the
blade holder
4. P ull outward on blade to ens ure it is
properly locked into the blade clamp.
ASSEMBLY AND OPERATION
!
CARTON CONTENTS
Fig. 1