GREAT PLAINS YP4425A Скачать руководство пользователя страница 136

Страница: 136 / 170

2018-07-30

Table of Contents

Index

401-805M

YP4425A

Table of Contents

Index

Options

132

Seed Lubricant

See “

Changing the Seed Box or Hopper

” on page 38.

See “

Bayer Seed Fluency Agent

” on page 123.

Null4:

USB-CANbus Adaptor

This kit allows a personal computer (computer not
included) to perform a monitor system (WSMT) software
update (DICKEY-john

update software is provided

separately on CD).

Before ordering, see if your dealer already has one.

Situations that call for this kit include:

•

DICKEY-john

10 inch monitor console not available

•

Non-standard CANbus console in use

The kit includes a USB to CANbus adapter, adapter-to
CANbus harness, and 32-bit Windows

drivers for the

USB adapter.

Unit-Mounted Row Options

Row-Pro™

Row-Pro™ adds a pneumatic cylinder to each row unit,
supplement the down-pressure springs. Under control of
the DICKEY-john

IntelliAg

seed monitor, the included

air system make real-time adjustments to row down
force. This has several benefits:

•

consistent down-force in varying field conditions;

•

the ability to set force levels anywhere in the row’s
range (and not just at cam notch values); and,

•

the ability to vary the force from the tractor cab
(by about one cam notch:



50 pounds,



23 kg).

No need to stop and manually reset all 24 cams.

Row-Pro™ is presently available only as a factory-
installed option with the original planter order.

Description

Order Number

Ezee Glide Plus Talc + Graphite Mix (5

gallon / 18.9 liter container)

821-069C

29248

Description

Order

Number

DJ INTELLIAG USB REPROGRAM ASM

823-364C

Description

Option

Kit

ROW-PRO YP44 24 ROW

n/a

31466



The computer, typically a laptop, must be running
Microsoft

Windows

XP (SP2) or Vista, and have a

CD (DVD or BD) reader, and have an available USB
port.



This kit is not required when the standard
DICKEY-john

10 inch monitor console, with its

SD card slot, is available.

Содержание YP4425A











































































































































































Результаты поиска

Содержание YP4425A

Отзывы:

GREAT PLAINS YP4425A, Руководство по эксплуатации, Страница: 136 / 170

Результаты поиска

Содержание YP4425A

Отзывы: