38
YP2425F/YP4025F
Table of Contents
Index
Great Plains Manufacturing, Inc.
403-362M
Table of Contents
Index
2013-03-25
Depending on their use, the YP2425F-2470,
YP4025F-1630 and YP4025F-1670 fertilizer hopper may
be or become a
“
permit-required confined space
”
under U.S. OSHA regulations (29 CFR 1910.146) and
similar regulations, statutes, insurance agreements and
local business policy. A written policy and permitting
process may be required for any hopper entry.
Hopper entry may be necessary in some unusual
circumstances, such as:
• hopper level or pressure sensor replacement; or,
• removal of obstructions too difficult to pull out with the
meter box removed and not susceptible to fishing or
pumping out from the open lid.
Should such a situation arise, observe the following
precautions:
1.
Evaluate the hazards
Review the material safety data sheets (MSDS) for
any treatments and/or fertilizers used in the hopper
since it was last thoroughly cleaned, and the most
recent materials even if the hopper was
subsequently cleaned. Retain the MSDS information
for any medical treatment that might be required.
2.
Designate or engage a team
Hopper entry is never a single-person activity. At
least one attendant/observer is necessary. Give
priority to individuals already trained in confined
space operations. Designate a leader (who will not
be the entrant) with authority to terminate the activity.
3.
Protect the team
Obtain the necessary safety equipment specified for
confined space exposure to those materials, paying
particular attention to respiratory support and
protection. This may include contaminant detection
equipment and positive ventilation to refresh air in
the hopper.
4.
Equip the team
At least one attendant must be equipped with
communications capability, to summon outside aid in
the event that the hopper worker is overcome. Equip
the entrant with a safety harness and safety line.
5.
Train the team
Review the hazards. Review the procedures.
Understand the use of the protective equipment.
Know the steps to take in emergencies. Practice
them. Train the observer to summon aid, and not
attempt hopper entry if the entrant is overcome.
6.
Secure the planter
Lower the planter or block the wheels to prevent
movement.
7.
Disrupt crusting or bridging
From outside the hopper, break up any hard
surfacing on top of the material, or forming layers
within the material. Such layers are extremely
dangerous to stand on.
8.
Empty the hopper
Follow the steps at “
Material Clean-Out
” on page
35. If a blockage makes this impossible, use an
external pump line to remove as much material as
possible without performing a hopper entry. Pump
until at least some material is exiting the clean-out
door. Leave the clean-out door open.
9.
Clean the hopper
From the outside at the walkboard, power-wash the
inside of the hopper. Use a mild detergent sprayer.
Rinse thoroughly.
10.
Air the hopper
Leave the hopper lid and clean-out door open, and
do not commence work until the rinse water has
completely evaporated.
11.
Plan the work. Work the plan.
Postpone the work if any team members, equipment
or other resources are missing, or weather/lighting
conditions are not favorable. Terminate and evacuate
if any unexpected situations arise.
