GREAT PLAINS YP2425, Руководство оператора

Страница: 30 / 166

2016-11-16 Table of Contents Index 401-406M
YP2425 and YP2425F Table of Contents Index 26
Operating Instructions
This section covers general operating procedures.
Experience, machine familiarity, and the following
information will lead to efficient operation and good
working habits. Always operate farm machinery with
safety in mind.
Pre-Start Checklist
Perform the following steps before transporting the YP24
to the field.
High Pressure Fluid Hazard:
Relieve pressure before disconnecting hydraulic lines. Use a
piece of paper or cardboard, NOT BODY PARTS, to check for
leaks. Wear protective gloves and safety glasses or goggles
when working with hydraulic systems. Escaping fluid under
pressure can have sufficient pressure to penetrate the skin
causing serious injury. If an accident occurs, seek immediate
medical assistance from a physician familiar with this type of
injury.

Carefully read “ Important Safety Information ” on
page 1.

Install seed rate meters appropriate for crop. To
change meters, see “
Seed Meter Setup and
Adjustment ” on page 76.

Install seed wheels appropriate for crop. To change
wheels, see “
Singulator Plus™ Meter Wheel
Replacement ” on page 78. With finger meters,
make sure correct 6- or 12-finger units are installed
for the intended row spacing.

Lubricate planter as indicated under “ Lubrication
and Scheduled Maintenance ” on page 102.

Check all tires for proper inflation. See “ Tire
Inflation Chart ” on page 125.

Check all bolts, pins, and fasteners. Torque as
shown in “
Torque Values Chart ” on page 126.

Check planter for worn or damaged parts. Repair or
replace parts before going to the field.

Check hydraulic hoses, fittings, and cylinders for
leaks. Repair or replace before going to the field.