GREAT PLAINS YP2425, Руководство оператора

Страница: 80 / 166

2016-11-16 Table of Contents Index 401-406M
YP2425 and YP2425F Table of Contents Index Adjustments 76
Seed Meter Setup and Adjustment
Your YP24 was originally supplied with a specific seed
meter type and internal components optimized for a
particular crop. Depending on the meter type and
configuration, there may be adjustments available.
You can also entirely change the meter, or swap internal
components, as your crop mix changes. This manual
section assumes that you need to install new meters,
then describes their internal configuration, and finally any
adjustments.
The YP24 planter supports
•
Great Plains Singulator Plus™ meters and
•
Finger pick-up meters.
The YP24 planter does not support feeder cups. Use a
Singulator Plus™ meter with specific wheels for
volumetric applications.
Meter Removal
1. Clean out meter. See “ Cleaning Out Meters ” on
page 95.
Refer to Figure 103
2. Slide the retaining ring up on the seed hose, and
remove the seed hose.
Refer to Figure 104
3. Release the lower latch.
Refer to Figure 105
4. Release the upper latch and swing the drive mount
away from the meter.
Figure 103
Seed Hose Retaining Ring
22883
Figure 104
Lower Meter Latch
22911
Figure 105
Upper Meter Latch
22911