GREAT PLAINS VT1500 Series Скачать руководство пользователя страница 15

Страница: 15 / 64

VT1500-0324 - VT1500-0924

Table of Contents

Index

Preparation and Setup

Great Plains

| 596-381M | 09/12/2022

Table of Contents

Index

Preparation and Setup

This section helps you prepare your tractor and VT1500-0324

- VT1500-0924 Sub-Soiler for use, and covers tasks that need

to be done seasonally, or when the tractor/Sub-Soiler

configuration changes.
Before using the Sub-Soiler in the field, you must hitch it to a

suitable tractor, inspect systems and level the Sub-Soiler.

Before using the Sub-Soiler for the first time, and periodically

thereafter, certain adjustments and calibrations are required.

Prior to Going to the Field Checklist

Complete this checklist before routine setup:



Read and understand “

Important Safety Information

”

on page 1.



Check that all working parts are moving freely, bolts are

tight, and cotter pins are spread.



Make sure your tractor horsepower matches the

implement you are pulling. This is important so the

implement can do the best possible job.



Check again for hydraulic leaks and watch that hoses do

not get pinched in hinges, wing stops, etc.



Check that all grease fittings are in place and lubricated.

See “

Lubrication

” on page 24. The hubs will come pre-

greased and will not need greased at this time.



Check that all safety decals and reflectors are correctly

located and legible. Replace if damaged. See “

Safety

Decals

” on page 5.



Inflate tires to pressure recommended and tighten wheel

bolts as specified. See “

Torque Values Chart

” on

page 28.

Содержание VT1500 Series

































































Результаты поиска

Содержание VT1500 Series

Отзывы:

Бренды по названию

Популярные бренды

GREAT PLAINS VT1500 Series, Руководство оператора

Результаты поиска

Содержание VT1500 Series

Отзывы:

Бренды по названию

Популярные бренды