GREAT PLAINS PL5500, Руководство оператора, Страница: 31 / 109

Great Plains | 411-633M | 10/21/2021 24
PL5500 Planter Table of Contents Index Operation
and right wings forward until each wing hook (4)
is resting on the tongue stop (5).
13. Set the tractor circuit fold lever to neutral.
14. When the planter is in the correct position with,
wing gauge wheels raised, wings fully folded,
and the cylinder locks installed on the lift cylinder
rods, tap the blue
FOLD icon
.
15.
After tapping the
FOLD
icon, the icon will change
to a gray color, and it will change slightly in
appearance, as shown. This will indicate the fold
hydraulics are inactive.

Tongue Stop Adjustment
If the wing hooks (1) do not capture the tongue stop
correctly, adjust the tongue stop.
1. Loosen the four bolts (2).
2. Adjust the tongue stop (3) up or down as
needed.
3. Tighten the bolts.

Height Switch
The height switch tells the seed monitoring system if
the planter is raised or lowered. On all planters, the
seed monitoring system only counts seed when the
planter is lowered and the drive is activated. On
electric drive planters, the height switch also enables
or disables the drive.
To adjust the height switch:
1. Lower the planter to the height at which seed
delivery should begin.
2. Loosen the nut (1) on the height switch.
3. Rotate the switch until the spring actuator (2)
touches the cylinder pin (3).
4. Rotate the switch in until it clicks. Tighten the
nuts to secure the bracket.
68686
3
5
3
4
4
68685
3
1
2
71153
3
2
1