GREAT PLAINS 7323DH Скачать руководство пользователя страница 5

Страница: 5 / 70

2021-06-10

Table of Contents

Index

556-235Q

Series II Disk Harrow

Table of Contents

Index

Important Safety Information 1

Important Safety Information

Look for Safety Symbol

The SAFETY ALERT SYMBOL indicates there is a

potential hazard to personal safety involved and extra

safety precaution must be taken. When you see this

symbol, be alert and carefully read the message that

follows it. In addition to design and configuration of

equipment, hazard control and accident prevention are

dependent upon the awareness, concern, prudence and

proper training of personnel involved in the operation,

transport, maintenance and storage of equipment.

Be Aware of Signal Words

Signal words designate a degree or level of hazard

seriousness.
DANGER indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

This signal word is limited to the most extreme situations,

typically for machine components that, for functional

purposes, cannot be guarded.
WARNING indicates a potentially hazardous situation

which, if not avoided, could result in death or serious

injury, and includes hazards that are exposed when

guards are removed. It may also be used to alert against

unsafe practices.
CAUTION indicates a potentially hazardous situation

which, if not avoided, may result in minor or moderate

injury. It may also be used to alert against unsafe

practices.

Use Adequate Lifting Means

The frame sections and gangs of this machine are

extremely heavy. If using multiple lifters, make sure each

is rated for at least its share of the load.

Prepare for Emergencies



Be prepared if a fire starts



Keep a first aid kit and fire extinguisher handy.



Keep emergency numbers for doctor, ambulance, hospital

and fire department near phone.

> 14,000

POUNDS

Содержание 7323DH







































































Результаты поиска

Содержание 7323DH

Отзывы:

Похожие инструкции для 7323DH

Бренды по названию

Популярные бренды

GREAT PLAINS 7323DH, Руководство по предпродажной подготовке

Результаты поиска

Содержание 7323DH

Отзывы:

Похожие инструкции для 7323DH

Бренды по названию

Популярные бренды