
196-366m
Veris Drive Operating Instructions
Great Plains
| | 4/22/19
89
Settings for Great Plains Precision
Population Controllers:
1.
Connect SiteMate computer to Console using 9-pin
serial cable.
Refer to Figure 75
2.
Follow instructions to set Calibration Number based
on row spacing and metering wheel.
3.
Press Function key and go to Rawson mode. Press
Function key until the Nominal Rate appears on the
display. Using the Up/Down arrow keys, set the
Nominal Rate to the same number as you set the
PF3000. Once Nominal Rate is set, press Function
key until the main operating screen appears.
4.
Press On/VR key again to toggle to VR mode. VR
should appear on the screen along with the Rate
that is being sent from the SiteMate computer.
Verify that the rate shown on the GP Controller
Console is the same as the recipe sent from
SiteMate. Press Engage key to activate the
Precision Population Controller.
5.
To change rates manually when in VR mode,
simply touch the Up/Down arrow keys. This will
change the Controller to the rate you select
manually. To return to VR, simply touch the On/VR
key to toggle back to VR mode.
Troubleshooting GPS-Based Seeding with
SiteMate
1.
No Rx rate appears on SiteMate
•
Has field been selected? Select VRT file.
•
Check recipe to verify that it is valid by viewing
Attributes for each zone in SiteMate.
•
If recipe calls for zero rate as the default, do
you have GPS signal, or are you outside of
field?
2.
Rx rate appears on SiteMate, but no Applied Rate
•
Make sure “Go” button on SiteMate is pressed
(button should read “Stop” when recipe is being
sent to GP Console).
•
you must be planting in order for Applied Rate
to appear
3.
Rx rate appears on SiteMate but not on GP
Controller Console
•
Make sure GP Controller Console is set to VR
Mode.
•
Double-check all cable connections.
•
Check Nominal rates on both the SiteMate
(SiteMate Settings, Step 4), and on the GP
Controller Console (GP Settings, Step 2).
These must be set to the same number.
4.
Rates on GP Controller Console and on SiteMate
do not match
Figure 75
9-Pin Serial Cable for Recipes
Содержание 3N-3010
Страница 111: ...196 366m Table of Contents Index Appendix Great Plains 4 22 19 Table of Contents Index 107 Appendix TP 71244...
Страница 115: ...196 366m Table of Contents Index Appendix Great Plains 4 22 19 Table of Contents Index 111...
Страница 117: ...Table of Contents Index Table of Contents Index...
Страница 118: ...Great Plains Mfg 1525 E North St P O Box 5060 Salina KS 67402 Table of Contents Index...